Tribological Studies on AlCrFeCuCoNi High Entropy Alloy Surface Coated on Ti-6Al-4V Using Plasma Transferred Arc Technique

Simple item page
dc.contributor.authorPrabu, G
dc.contributor.authorDuraiselvam, Muthukannan
dc.date.accessioned2026-10-12T10:11:54Z
dc.date.available2026-10-12T10:11:54Z
dc.date.issued2022-06-10
dc.description.abstractAlCrFeCuCoNi high entropy particles were alloyed on Ti-6Al-4V surface using Plasma transferred arc (PTA ) process. PTA alloyed surfaces were investigated for their phase formation, microhardness improvement and wear behaviour. The various wear mechanism and their corresponding surface roughness were studied. The results revealed that the dual phase of BCC and FCC microstructure along with some intermetallic compounds were grown in the alloyed region through the PTA technique and good metallurgical bonding of the alloyed region with the base material were achieved. The PTA alloyed region exhibited a hardness of 718 HV0.2 which is 2.2 times higher than the hardness of base material. The PTA alloyed samples showed higher wear resistance due to the solid solution strengthening as the HEA has high entropy of mixing that leads to the reduction of free energy of the alloyed region. It exhibited better interconnection of the coated material and superior metallurgical bonding to the base material. Frictional heat produced during the wear test has promoted the formation of FeO, Cr2O3, CuO, NiO and Al2O3 oxide film on the PTA alloyed sample. These oxide films act as a barrier between two mating surfaces and improve the tribo performance of the PTA alloyed sample. © 2022. The Author(s).
dc.identifier.issn17333490
dc.identifier.urihttps://doi.org/10.24425/amm.2022.137772
dc.identifier.urihttp://nitt.ndl.gov.in/handle/123456789/318
dc.language.isoen
dc.publisherPolska Akademia Nauk
dc.relation.ispartofseriesArchives of Metallurgy and Materials; Vol. 67/ No. 2
dc.titleTribological Studies on AlCrFeCuCoNi High Entropy Alloy Surface Coated on Ti-6Al-4V Using Plasma Transferred Arc Technique
dc.typeArticle
Files
Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
Tribological Studies on AlCrFeCuCoNi High Entropy Alloy Surface Coated on Ti-6Al-4V Using Plasma Transferred Arc Technique.pdf
Size:
5.18 MB
Format:
Adobe Portable Document Format
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Journal Articles