Academic Departments

Permanent URI for this community

http://nitt.ndl.gov.in/handle/123456789/30

Browse

Browsing Academic Departments by Author "Anandan, S"

Now showing 1 - 5 of 5
  • No Thumbnail Available
    Item
    Economical synthesis of silver nanoparticles using leaf extract of Acalypha hispida and its application in the detection of Mn(II) ions
    (Elsevier B.V., 2017-07-10) Sithara, R; Selvakumar, P; Anandan, S; Sivashanmugam, P
    This study was focused on the synthesis of silver nanoparticles using Acalypha hispida leaf extract and the characterization of the particles using UV–Vis spectroscopy, XRD, FT-IR, and TEM. The results showed the formation of silver nanoparticles, crystalline in nature, with an average size of 20–50 nm. The leaf extract components were analyzed with GC–MS and exhibited a high content of Phytol (40.52%), n-Hexadecanoic acid (9.67%), 1,2,3-Benzenetriol (7.04%), α-D-Mannofuranoside methyl (6.22%), and D-Allose (4.45%). The optimization and statistical investigation of reaction parameters were studied and maximum yield with suitable properties of silver nanoparticles was obtained at leaf extract volume (0.5 mL), the concentration of silver nitrate (1.75 mM), and reaction temperature (50 °C). The method of detecting Mn2+ ions using the colloidal silver nanoparticles was discussed. The minimum and maximum detection limit were found to be 50 and 200 µM of Mn(II) ions, respectively. Thus, the obtained results encourage the use of economical synthesis of silver nanoparticles in the development of nanosensors to detect the pollutants present in industrial effluents. © 2017
  • No Thumbnail Available
    Item
    Performance Analysis of PLA Material Based Micro-Turbines for Low Wind Speed Applications
    (MDPI, 2022-10-05) Aljafari, Belqasem; Samithas, Devakirubakaran; Balachandran, Praveen Kumar; Anandan, Sambandam; Anandan, S; Babu, Thanikanti Sudhakar
    Various studies have been conducted in recent years to find solutions to the issues in wind energy conversion systems. A 100W horizontal axis micro wind turbine is built for low wind speed applications in this work. The Blade Element Momentum theory approach was used to design the 100W micro wind turbine blade. The wind turbine blade 3D model was created using the CREO CAD 3.0 software. Based on the aerodynamic studies, the airfoil S9000 is chosen among others for generating high power at low wind speed. The density, Young’s modulus, and the Poisson ratio of the proposed wind turbine blade model with acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA) materials were compared. ABS and PLA materials were investigated using a 0.33 mm layer of infill ranging from 10% to 100%. PLA and ABS output values were compared in terms of deformation, equivalent stress, and equivalent strain. PLA materials, on the other hand, have less deformation and greater structural properties than ABS materials. The wind blade structural analysis was performed in ANSYS 15 software, and the details of experimental and simulated results are presented in this paper. © 2022 by the authors.
  • No Thumbnail Available
    Item
    Response Surface Methodology Analysis of Energy Harvesting System over Pathway Tiles
    (MDPI, 2023-01-29) Gothwal, P; Kumar, A; Rathore, D; Mukherji, R; Vetriselvi, T; Anandan, S
    This paper presents an experimental analysis of the optimization of PZT-based tiles for energy harvesting. The hardware (actual experiment), PZT-based tiles, were developed using 6 × 6 piezoelectric (PZT—lead zirconate titanate) sensors of 40 mm in diameter on a hard cardboard sheet (300 × 300 mm2). Our experimental analysis of the designed tiles obtained an optimized power of 3.626 mW (85 kg or 0.83 kN using 36 sensors) for one footstep and 0.9 mW for 30 footsteps at high tapping frequency. Theoretical analysis was conducted with software (Design-Expert) using the response surface methodology (RSM) for optimized PZT tiles, obtaining a power of 6784.155 mW at 150 kg or 1.47 kN weight using 34 sensors. This software helped to formulate the mathematical equation for the most suitable PZT tile model for power optimization. It used the quadratic model to provide adjusted and predicted R2 values of 0.9916 and 0.9650, respectively. The values were less than 0.2 apart, which indicates a high correlation between the actual and predicted values. The outcome of the various experiments can help with the selection of input factors for optimized power during pavement design. © 2023 by the authors.
  • No Thumbnail Available
    Item
    Studies on evaluation of surfactant coupled sonication pretreatment on Ulva fasciata (marine macroalgae) for enhanced biohydrogen production
    (Elsevier B.V., 2021-11-04) Snehya, A.V.; Sundaramahalingam, M.A.; Rajeshbanu, J; Anandan, S; Sivashanmugam, P
    Biohydrogen production from marine macroalgal biomass by advanced pre-treatment strategies is considered a clean energy technology. The present study focuses on investigating the effects of sonication pre-treatment (SP) and saponin coupled sonic pre-treatment (SSP) on Ulva fasciata for enhancing the production of biohydrogen. The SP and SSP were optimized to improve the hydrolysis process during digestion. The optimized time and sonication power were found respectively as 30 min and 200 W. A high concentration of biopolymer release was noticed in SSP than SP at optimized conditions. The surfactant dosage in SSP was optimized at 0.0036 g/g TS. The effect of SSP process was assessed by estimation of COD (Chemical Oxygen Demand) and SCOD (Soluble Chemical Oxygen Demand) release. The study revealed that, at a specific energy of 36,000 KJ/Kg TS, the SCOD release was higher in SSP (1900 mg/L) than SP (1050 mg/L). The SSP process could improve the COD solubilization to 15 % more than the SP. Carbohydrate and protein release are also more in SSP than SP. The use of biosurfactants significantly reduced the energy utilization in the hydrolysis process. The SSP pre-treated Ulva fasciata biomass has yielded a higher biohydrogen of 91.7 mL/g COD which is higher compared to SP (40.5 mL/g COD) and Control (9 mL/g COD). © 2021
  • No Thumbnail Available
    Item
    Upconverter loaded MoS2 counter electrode for broadband dye-sensitized solar cell applications
    (Frontiers Media SA, 2025-01-15) Kawya J.; Durairaj, M; Anandan, S; Sabari Girisun, T. C.
    An interesting approach of including an upconverter in the MoS2 counter electrode can yield broadband light harvesting Pt-free DSSC assembly. Here different upconverter (UC) nanoparticles (Yb, Er incorporated NaYF4, YF3, CeO2 & Y2O3) were synthesized and loaded in MoS2 thin film by hydrothermal method. The inclusion of UCs in MoS2 films exposed without any secondary formation of upconverters and the uniform deposition of the films are confirmed through XRD and FESEM analysis respectively. The absorption spectrum (UV-Vis-NIR) confirms the increase in absorption intensity in visible and NIR regions due to the incorporation of UCs. Under 980 nm excitation, the UCs-loaded MoS2 films show emission in blue (450–490 nm), green (520–540 nm) and red (600–700 nm) regions due to the f-f inner transition occurring in the Er ions. The oxide and fluoride UCs-based DSSCs were fabricated with an FTO/TiO2/N719/Triiodide electrolyte/UC@MoS2/FTO assembly. Oxide UCs show greater electrocatalytic activity, which might be owed to the films exposed with more catalytic active sites favourable for ion transportation in the I−/I−3 electrolyte. Among them, higher photoconversion efficiency (PCE) of 7.1% was witnessed for (Y2O3: Er, Yb) @MoS2 counter electrode-based DSSC which is due to the good conductivity (RS) of the film, the longer electron lifetime and photon harvesting enhancement by upconversion process. It is notably convinced that the UC-loaded MoS2 films can be used as an effective counter electrode for the possible realization of upconverter DSSC and used for broadband light absorption. Copyright © 2025 Kawya, Durairaj, Anandan and Sabari Girisun.